Multiquip

Multiquip

MVB150H

3,417 lb. cf, Honda GX 160, 21.9 in. plate
 

Give interlocking pavers an even finish.

  • The machines’ hard rubber rollers make it virtually impossible to chip corners, scartch, break or drag pavers.
  • Great for narrow areas and exterting compaction pressure alongside walls.
  • Tooles foldable handle allows for quick and easy loading into vans and trucks.
  • Rollers allow for easy pull back to compact on the spot.
Unit Specifications
# of Rollers4
Roller Diameter3.3 in83.82 mm
Centrifugal Force3417 lbf15.2 kN
Exciter Speed5800 VPM
Plate Size21.89 x 29.62 in
556 x 752 mm
Max Forward Speed
Per Min.
72 ft22 m
Dimensions & Weights
Overall Length42.72 in1085 mm
Overall Width25.28 in642 mm
Overall Height35.63 in903 mm
Shipping Dimensions35 x 26 x 33 in
889 x 660 x 838 mm
Operating Weight348 lb158 kg
Shipping Weight358 lb163 kg

MVB85H

2,270 lb. cf, Honda GX 120, 12.6 in. plate
 

Give interlocking pavers an even finish.

 

  • The machines’ hard rubber rollers make it virtually impossible to chip corners, scartch, break or drag pavers.
  • Great for narrow areas and exterting compaction pressure alongside walls.
  • Tooles foldable handle allows for quick and easy loading into vans and trucks.
  • Rollers allow for easy pull back to compact on the spot.

MTR40HF

Multiquip’s Mikasa MTR40HF is a unique rammer that is prefered by utility contractors and landscaper due to its ability to work in confined spaces.

  • Lightweight and portable – only 101 pounds (46 kg)
  • Grease lubricated design eliminates making it ideal for narrow trenches
  • Reliable 4-stroke Honda engine for reliable starting
  • Ideal for landscapers, electrical contractors and plumbing contractors
  • Optional foot extensions available for trench work
  • Redesigned fuel tank to meet EPA standards for evaporative emmissions
Unit Specifications
Blows Per Min.699
Impact Force1215 lbf5.5 kgf
Shoe Jump Height2.2 in55 mm
Shoe Dimensions (LxW)10.6 x 5.9 in
270 x 150 mm
Travel Speed Per Min.30 ft9 m
Fuel Tank Capacity2.1 qt2 L
Engine Specifications
Engine Make/ModelHonda GX100
Start MethodRecoil
Engine Power2.8 HP2.1 kW
Engine RPM4100
Fuel TypeGasoline
Dimensions & Weights
Overall Length24.5 in622 mm
Overall Width13.8 in351 mm
Overall Height43.7 in1110 mm
Operating Weight101 lb46 kg
Shipping Weight107 lb49 kg

MVC88VTH

  • Reliable engine with Honda GX160 offering easy start-up and low oil shutdown for durability.
  • Cyclonic pre-cleaner captures most airborne contaminants for engine protection and extended service life.
  • Single cast baseplate and eccentric housing lowers center of gravity and increases travel speed by 12% for greater productivity.
  • Hour/tachometer measures runtime and engine rpm.
  • Tubular steel roll bar protects engine components and provides central lifting point. 
  • Sealed belt cover keeps dirt and rocks out extending belt life.
  • Open base plate design makes for easier removal of dirt and rock build-up. 
  • Cog-tooth belt drive enables longer life compared to conventional V-belts.
  • Optional urethane plate attachment for use on paving stones and brick pavers (UPA88T).
  • Optional transport wheel kit WHL88T for serial number T2A9197 and below.  WHL88TC for serial number T2A9198 and above.
Unit Specifications
Centrifugal Force3372 lbf15 kN
Exciter Speed6000 VPM
Plate Size19.7 x 20.7 in
500 x 525 mm
Max Forward Speed
Per Min.
82 ft25 m
Fuel Consumption
Per Hour
0.31 gal1.17 L
Dimensions & Weights
Overall Length41.75 in1060 mm
Overall Width19.75 in502 mm
Overall Height37 in940 mm
Shipping Dimensions38 x 22 x 29 in
965 x 559 x 737 mm
Operating Weight207 lb94 kg
Shipping Weight225 lb102 kg

MC3PEA

3cf, .75 HP Electric 115V 1Φ , Includes stand
 

The Mix-N-Go is durable, versatile and ideal for users of all skill levels.

  • Perfect for small footings, bases, patching
  • Use as a wheelbarrel or with a stand (included)
  • Thick polyethylene drum – Resists rust and dents
  • Highly durable – Gears immersed in oil for long trouble free lift
  • 3 cf mixing capacity
Unit Specifications
Max Drum Capacity (Mixing)3 cu. ft
Drum TypePoly
Power Source3/4 HP, 115V, 1ø
Dimensions & Weights
Overall Length48.5 in1219 mm
Overall Width23.5 in597 mm
Overall Height34 in863.6 mm
Operating Weight138 lb62.6 kg
Shipping Weight138 lb62.6 kg

GA25HR

The GA25HR model is ideal for small tool applications and with its high quality construction; this unit is tough enough for any jobsite condition.
  • Lightweight and compact design for easy transport
  • 100% copper windings for maximum conductivity
  • Alternator design eliminates maintenance by removing brushes and slip rings
  • Hour meter for proper service intervals and usage information 
  • Heavy-duty 1-inch (25 mm) steel pipe frame and shock mounts protect the generator
  • Runs for six hours on a full tank at full load
  • Powered by a Honda GX160 engine with low-oil shutdown
Unit Specifications
Alternator DesignBrushless
Frequency60 hz
PhaseSingle Phase
Voltage120 V
Sound level at 30 ft70 dBA
Fuel Tank Capacity3.2 gal12 L
Dimensions & Weights
Overall Length20.9 in530 mm
Overall Width17.7 in450 mm
Overall Height20.1 in510 mm
Shipping Dimensions20.9 x 17.7 x 20.1 in
530 x 450 x 510 mm
Operating Weight132 lb60 kg
Shipping Weight110 lb50 kg

GA36HR

An all-around performer that delivers 120/240V output in a mid-size package. This unit is ideal for supplying power to heaters, power tools and small air-compressors. HR models come standard with a GFCI protected main breaker, hour meter, wheel kit and automatic idle control.

  • Lightweight and compact design for easy transport
  • 100% copper windings for maximum conductivity
  • Alternator design eliminates maintenance by removing brushes and slip rings
  • Heavy-duty 1-inch (25 mm) steel pipe frame and shock mounts protect the generator
  • Includes a wheel kit and folding lifting bale as standard equipment
  • Powered by Honda GX240 engine with low-oil shutdown and idle control
  • Full panel GFCI protection – OSHA and NEC compliant
Unit Specifications
Alternator DesignBrushless
Frequency60 hz
PhaseSingle Phase
Voltage120/240 V
Sound level at 30 ft76 dBA
Fuel Tank Capacity5 gal19 L
Dimensions & Weights
Overall Length25.5 in64 mm
Overall Width22 in56 mm
Overall Height24 in61 mm
Operating Weight215.73 lb97.85 kg
Shipping Weight174 lb79 kg

GA97HEA

The generator for the toughest jobs. This delivers enough power to run a variety of tools and equipment. Powered by a twin-cylinder engine with electric start, it offers up to 10 hours of continuous run time.
  • Twin duplex receptacles and three twist-lock receptacles for job site versatility
  • 100% copper windings for maximum conductivity
  • Alternator design eliminates maintenance by removing brushes and slip rings
  • Heavy-duty 1-inch (25 mm) steel pipe frame and shock mounts protect the generator
  • Includes folding lifting bale as standard equipment
  • Powered by a twin-cylinder Honda GX630 engine with low-oil shutdown, automatic idle control
  • Full panel GFCI protection – OSHA and NEC compliant
Unit Specifications
Alternator DesignBrushless
Frequency60 hz
PhaseSingle Phase
Voltage120/240 V
Sound level at 30 ft79 dBA
Fuel Tank Capacity10 gal37.8 L
Dimensions & Weights
Overall Length31.25 in800 mm
Overall Width21.25 in540 mm
Overall Height27.5 in700 mm
Shipping Dimensions32 x 22.5 x 31.5 in
81 x 56 x 91 mm
Operating Weight402.73 lb182.67 kg
Shipping Weight342 lb155 kg

 

Multiquip

Buyer's Guide, Comparison and Advices

About Multiquip Inc.

 

Company Overview

Multiquip, a diverse manufacturer and supplier of world class quality industrial products and solutions, is an established and proven company, well positioned for steady, long-term growth and committed to investing and maintaining high quality, reliable products and exceptional customer service.

Founded in 1973, Multiquip is one of the largest, most diversified  manufacturers and suppliers of world class quality products and solutions for the construction, industrial, telecom, government, non-commercial, aerospace, municipalities/federal, entertainment, and oil and gas exploration markets. Multiquip’s comprehensive product portfolio encompasses light to medium construction equipment, power generators and lighting.

With distribution partners in Asia, United Kingdom, Latin America and Europe, Multiquip has worldwide reach; they distribute products in more than 70 countries through thousands of authorized distribution partners.

Business Lines

Multiquip’s business lines include: construction equipment, power generation, lighting and parts.

Multiquip has highly reliable light to medium construction equipment including rammers, rollers, plate compactors, and other compaction equipment; concrete and masonry pumping, cutting, placing and finishing equipment; dewatering pumps; blades, bits and cutting equipment.  Multiquip distributes renowned brands such as Mikasa, Denyo and Rammax. The company manufactures and distributes brands of MQ equipment including: MQ Power, Whiteman, Mayco, and Essick.

Multiquip has a full line of innovative diesel, gasoline, and natural gas powered generators ranging from 2.3 kW to 2,000 kW.  Respected worldwide for their unsurpassed reliability, efficiency and ultra-quiet performance, these generators have set the standard in a wide array of applications.

The company also has an array of portable lighting options for industrial and entertainment applications.

airheadtowablestube
Logo
Enable registration in settings - general